Bajaj Bearings Private Limited

Mira Road East, Thane, Maharashtra

GST No. 27AAACB8600N1ZK

Send Email
0804604354478% Response Rate
Search

Home » Our Product Range


Products & Services

Bajaj bearings are manufactured from bearing steel grade SAE 52100 (as per international standard), with Modern Technologies and Skilled workforce.


Volvo Truck BearingsGet Quotation

We are the manufacturer and exporter of Volvo Truck Bearings, Mercedes Benz truck bearings, Scania Truck bearings, SAF Truck bearings,DAF truck bearings , MAN truck bearings, Renault truck bearings, Iveco truck bearings, truck wheel hub bearing, bearing set without spacer,Bearings set With Kit, bearing set with spacer, tapered roller bearing, Needle Roller Bearings.

Model No.

Position

Int. Brgs. No.

Cross ref.

Dimensions

OEM NO.

Volvo Truck & Bus FH 12, FH 16, FL 6, FM 10, FM9,

Rear Wheel Bearing

F 566425.H195

VKBA 5423
SET 1314

93.8/94x148x135

5001861915

Volvo Truck & Bus FH 12, FH 16, FL 6, FM 10, FM9,

Front wheel Bearing

F 566426.H195

SET1312
581079 E

68.2x125x115

7421021391

Volvo Truck & Bus B 6, 7700, 8500, 8700, 6FH 12, FH 16, FL 6, FM 10, FM9,

Front wheel Bearing

F 566427.H195

SET1311
800793

58x110x115

7421021381

Volvo / Renault Truck & Bus

Front wheel Bearing

805531HUB

SET1338
BTF-0068
VKBA 5407

60x168x102

5010308616

Volvo / Renault Truck & Bus

Front wheel Bearing

F 568879.H195

F568879.H195

78x 130x 135

21102685

 

 

Yes! I am interested




Mercedes Benz Truck BearingsGet Quotation

We are the manufacturer and exporter of mercedes benz truck bearings, volvo truck bearings, Renault truck bearing, scania truck bearings, SAF truck bearings, DAF truck bearings , IVECO truck bearing, truck wheel hub bearing, bearing set without spacer, Bearings set With Kit, bearing set with spacer, tapered roller bearing, Needle Roller Bearings.truck bearings and seals, truck bearing manufacturers, bearings truck parts, truck wheel bearings, hand truck bearings, truck ball bearings, truck axle bearings, truck parts and bearings, semi truck axle bearings, heavy truck axle bearings, truck wheel bearing adjustment, truck wheel bearing adjustment procedure, big truck bearings, truck centre bearings, truck carrier bearings, truck centre bearings , truck hub bearings cost, change truck bearings, truck bearing definition, dump truck bearings, diesel truck bearings, heavy truck bearing race driver, semi truck bearing race driver, heavy duty truck bearing packer, truck wheel bearing race driver, truck drive shaft bearing, euro truck bearing kit, engine bearing truck, hand truck bearings for sale, truck wheel bearings for sale, bearings for truck.

Specifications:

30209

32222

537/532

32219

32212

522380

528946

32220

32213

524850

528983 B

572813 A

32216

529084 D

32314 A

32221

32217

534565

32310

330632 C

Yes! I am interested




Scania Truck BearingsGet Quotation

We are the manufacturer and exporter of Scania Truck bearings, SAF Truck Bearings, Volvo Truck Bearings, Mercedes Benz truck bearings, DAF Truck bearing, IVECO Truck bearing, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, tapered roller bearing.

The Scania Truck Bearings is suitable for dry applications at installation work zones. These bearings are developed from best grade stainless steel and most sophisticated techniques, in order to achieve high acceptability in dry work areas with high hygiene. With sturdiness and high axial load endurance, Scania truck bearings.

31311

32022

BTH 0018A

31312

32207

(1724482 / 1476945/

31313

32208

1439070/1413785/

33018

32215

1439070/1443078)

33206

32216

(VKBA 5314)

33208

32218

(201037/201014)

33212

32219

(571762.H195)

33215

32220

(NP078914)

543562

32222

T2ED040

575 / 572

32219

JF4549 / 4510 (T2ED 045)

10049 / 10010 (T2ED100)

32218

5049 / 5010 (T2ED050)

205149 / 205110

32311

5549 / 5510 (T2ED055)

218248 / 218210

32312

6049 / 6010 (T2ED060)

220149 / 220110

32316

716649 / 16610

32315 B

482 / 493

4049 / 4010 (T2ED040)

32317 B

5049 / 5010

804358

39580 / 39528 (VKT 8600)

508748 / 508710

805008

48190 / 48120

516849 / 516810

805415A

807049 / 807010

521471 (23967 Q)

809302

813841 / 813810

522649 / 522610

BTH 022

Yes! I am interested




Volvo Bearings ContinuedGet Quotation
Prominent & Leading Manufacturer from Thane, we offer front wheel hub bearings for volvo truck and bus, volvo rear wheel bearing for truck and bus, wheel bearing no. f 568879.h195, volvo truck & bus front wheel bearing and volvo front wheel bearing for truck & bus.

Yes! I am interested




Needle Roller BearingsGet Quotation

We are the manufacturer and exporter of Needle Roller Bearings For Man Truck Bearings, IVECO Truck Bearings, DAF Truck bearings, Renault Truck Bearings, Scania Truck bearings, SAF Truck Bearings, Volvo Truck Bearings, Mercedes Benz truck bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, and tapered roller bearing.

Needle Roller Bearingsuse needle rollers as rolling elements. The needle rollers are a maximum of 5 mm in diameter and are 3 to 10 times as long as they are in diameter. Because the bearings use needle rollers as rolling elements, the cross-section is thin, but they have a high load capacity for their size. Because of the large number of rolling elements, the bearings have high rigidity and are ideally suited to wobbling or pivoting motion.

Needle roller bearings contain precision needle rolling elements, which have multiple uses in a variety of industries including automotive, truck, farm and construction equipment, two-cycle engines, outboard engines and consumer durables.

Needle rollers are mainly used as bearing rolling elements to transmit torque and reduce friction. They can also serve as precision shafts or as precision locating pins. Other uses for needle roller bearings include crank pins, precision shafts and as locating pins.

Products:

Needle Roller Bearings

DL Series Bearings

DC Series Bearings

JV Series Bearings

JL Series Bearings

NK, NKI, NBI Series

RL Series

Bearings Kit

Rear Wheel Bearings Kit

Front Wheel Bearings Kit

Gear Box Bearings Kit

Clutch KAS

Bearing Kit - HUB Pins

Bearing Kit HUB Pin CNG - Old Model

Bearing Kit HUB Pin CNG - New Model

Bearing Kit HUB Pin APE

Industries we serve:

Bajaj Bearings are specialized in producing premium quality bearing like automotive bearing, precision bearings, precision ball bearings, precision automotive bearings, agricultural machinery bearing, engineering bearing and many more.

Our products are used in:

- Moped
- Scooter
- Motorcycle
- Three Wheeler
- Car
- LCV, HCV
- Tractor
- Agricultural Machinery
- Textile Machinery
- General Machinery

Yes! I am interested




Ball BearingsGet Quotation

We are the manufacturer and exporter of Ball Bearings & we offer supreme quality Ball Bearings, which are the form of rolling element bearings that use balls to maintain the division between the bearing races. Here, the ball bearings inclined to have far more lower coefficient of friction than if two flat surfaces were sliding against each other. We make these available in two broad categories, which are deep groove ball bearings and double row ball bearings. This reduces rotational friction and supports radial and axial loads. These bearings are manufactured from bearings Quality Steel i.e SAE 52100 Steel grade l, which are corrosion proof and can operate even under tough weather conditions.

Deep Groove Ball Bearings: We provide Deep Groove Ball Bearings, which support superior loads in comparison to other ball bearings. The close conformity between the grooves and balls enable deep groove ball bearings to accommodate axial loads in both directions. This bearing range is also proficient of handling radial loads at high speeds. Deep Groove Ball Bearings have deep, continuous raceway grooves and these raceway grooves have a close obscuration with the balls.

Product Details:

Ball Material

SAE 52100

Bore Size

12- 100 mm

Application

Wheel Bearing


Double Row Ball Bearings: The Double Row Ball Bearings are built for the use, where considerable amount of shaft deflection or angular misalignment are anticipated. The design comprises of two rows of ball sets with cages and a common spherical raceway in outer rings, making these bearings capable of taking angular misalignment of shaft relative to housing. These bearings allow the lowest friction of all rolling element bearings and are able to run cooler even at high operating speeds.Details:

Material

SAE 52100

Thickness

12 - 75 mm

Type

Ball Bearings

Yes! I am interested




King Pin BearingsGet Quotation

We are the manufacturer and exporter of King Pin Bearings In TR & SR Type The kingpin, also written as king-pin or king pin, is a very important component in any vehicle. It is the main pivot in the mechanism of steering in any vehicle. King Pins are also used as fifth wheel coupling apparatus in vehicles. King Pins have an important property of being able to carry heavier weights and therefore can be mostly seen in Large or Heavy Vehicles.

The Kingpin Bearing is capable of bearing thrust pressure in various industrial pump applications and possesses high resistivity and durability. These are constructed using high grade raw materials, which are tested under the supervision of experienced professionals. Kingpin bearing is the main pivot in the steering mechanism of a car or other vehicles.

We are manufacturer King pin Bearings for Man Truck Bearings, IVECO Truck Bearings, DAF Truck bearings, Renault Truck Bearings, Scania Truck bearings, SAF Truck Bearings, Volvo Truck Bearings, Mercedes Benz truck bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, and tapered roller bearing.

The Kingpin Bearing is capable of bearing thrust pressure in various industrial pump applications and possesses high resistivity and durability. These are constructed using high grade raw materials, which are tested under the supervision of experienced professionals. Kingpin bearing is the main pivot in the steering mechanism of a car or other vehicles.

Features: Excellent prevention from overrunning & backstopping

Self-Aligned ,High load sustaining capacity,Seal excludes contamination with a separator and bore liner,Prevent rotational damage,Get automatically locked when rolled in opposite direction

Applications: Heavy Vehicles & other automobiles,Marine engines,Agricultural equipment’s,Steering,Light Vehicles,Industrial movers,Fork lift trucks,Conveyors,Construction machinery,Presses & machine tools

Yes! I am interested




Taper Roller BearingsGet Quotation

We are the manufacturer and exporter of Taper Roller Bearings for IVECO Truck Bearings, DAF Truck bearings, Renault Truck Bearings, Scania Truck bearings, SAF Truck Bearings, Volvo Truck Bearings, Mercedes Benz truck bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, and tapered roller bearing.

The Taper Roller Bearings are mainly used for supporting axial forces equally in both direction of bearing. Here, the inner and outer raceways are segments of cones and made with a taper so the conical surfaces of the raceways and roller would all meet at a common point on the main axis of the bearing.

Available in pairs, these bearings are mainly used in Automotive Industries, construction Industries, mining and agriculture industry. Bajaj Bearings provide them in all four major categories i.e.

≠ Single Row,

≠ Double Row

≠ Industrial Row Taper Roller Bearings.

Above are widely installed in cars, marine engines, light vehicles, agricultural equipment’s, steering etc.

Available Sizes:

Taper Roller Bearings - Inch Size: These are completely different from metric taper roller bearing; the inner ring with roller and cages assembly and the outer ring have individual designations.

Taper Roller Bearings - MM Size: The designating of bearings is done as per the international standards. The metric bearings have normal tolerances standards.

Features:

30 / 31 / 32 / 33 / LM / HM series / Inches and MM series

250mm OD (Outer Diameter) maximum capacity

Customized maximum till 300mm OD

Applications:

Cars, Light Vehicles, Heavy Vehicles and Other Automobiles

Marine Engines

Heavy Earth Movers and Industrial Movers

Agricultural Equipment

Construction Machinery

Conveyors

Fork Lift Trucks

Gears & Drives

Pumps

Wheel Assembly

Presses & Machine Tools

Yes! I am interested




SAF Truck BearingsGet Quotation

We are the manufacturer and exporter of SAF Truck Bearings, Volvo Truck Bearings, mercedes benz truck bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, tapered roller bearing.

3434365000 / 3434301800 / 3434301200 / 3200200151

OEM NUMBER

3434365000/3434301800/3434301200/3200200151/4200200100/4200200100/1002689/1003457/100167600/100167601/

FAG NO

564734.H195 / 809302

SKF NO.

VKBA 5549

REF

CWT (COMPACT WHEEL Truck)

DIMENSION

82.00 * 196.00 *110.00

WEIGHT

14.940 Kgs. WITH BOLT

Bajaj Bearings No.

BBPL 012

CONTENT

COMPLETE ONE PC HUB WITH 12 NUTS.

SAF Truck Bearings are meant for superior-speed applications in several automotive applications. These bearings are developed sturdily by making use of optimum quality cast steel & iron along with the implementation of most sophisticated techniques to make it capable of accommodating axial loads in both directions.

The features of our offered bearing range are high load sustainability, dimensional accuracy, rigid structure, shock load endurance, well aligned holes arrangement, frictionless motion and noise free operation.

Yes! I am interested




DAF Truck BearingsGet Quotation

We are the manufacturer and exporter of DAF Truck bearings, Renault Truck Bearings, Scania Truck bearings, SAF Truck Bearings, Volvo Truck Bearings, Mercedes Benz truck bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, and tapered roller bearing.

We provide advanced DAF Bearings that are capable of carrying combination of large thrust and radial loads. These are relatively large sliding friction generated at this flange, which makes it suitable for high speed applications.

Cross No.

OEM NUMBER

805958

1391615

566834.H195

1801595

566074.H195

1801592

566283.01.H195

1391617

566193.H195

1428396

T2EE100

266487

33016

631780

32016

640618

32019

AMPA012

32206

491899

32311

275823

33019

676987

33020

676988

33021

266488


Yes! I am interested




IVECO Truck BearingsGet Quotation

We are the manufacturer and exporter of IVECO Truck Bearings, DAF Truck bearings, Renault Truck Bearings, Scania Truck bearings, SAF Truck Bearings, Volvo Truck Bearings, Mercedes Benz truck bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, and tapered roller bearing.

We are involved in manufacturing bearings for the Italian giant IVECO. These bearings handle an amalgamation of thrust and radial loads. These are sturdily developed from top grade steel ensuring dimensional stability and longevity. Our bearings comprises of components like inner ring, cone, rolling element, cage, outer ring and tapered rollers, which assist in noise free and frictionless functioning of the bearings.

Features:Dimensional accuracy,Corrosion resistant,high durability,Elevated load sustainability

805092 C

805011 C

201072

BTH 1011

BTH 053

201070

801974. H195

3984/3920

212049/212010

18790/18720

30218

33113

32217

33019

28150/28300

30221

33118

32218

415647/415610

368A/362A

Yes! I am interested




Renault Truck BearingsGet Quotation

We are the manufacturer and exporter of Renault Truck Bearings, Scania Truck bearings, SAF Truck Bearings, Volvo Truck Bearings, Mercedes Benz truck bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, and tapered roller bearing.

We have a qualitative range of Renault Bearing, which is used for rotating axles during heavy duty machining applications. These bearings are prudently made from finest quality materials to suffice the advanced wheel bearing requirement of the industry. Our offered range of bearings offers precise solution to trailer, rear and front axles.

MODEL NO.

POSITION

INT. BRGS NO.

CROSS REF.

DIEMENSIONS

OEM NO.

RENAULT PREMIUM

REAR WHEEL BEARING

566425.H195

VKBA 5423
SET 1314

93,8/94x148x135

5001861915

PREMIUM- MAGNUM - KERAX

FRONT WHEEL BEARING

566426.H195

SET1312
581079 E

68,2x125x115

7421021391

PREMIUM- MAGNUM

FRONT WHEEL BEARING

566427. H195

SET1311
800793

58x110x115

7421021381

DAF-RENAULT CRADLE BEARING

GEARBOX BEARING

528946

79810305
SKF 331126/Q

105x170x40

39816805

RENAULT TRUCK MIDIUM DORUK

FRONT WHEEL BEARING

805531HUB


SET1338
BTF-0068
VKBA 5407

60x168x102

5010308616

PREMIUM-WITH ABS

FRONT WHEEL BEARING

VKBA 5420 HUB

HDS001
201043

70X194x110

5010439770B

Yes! I am interested




Truck BearingsGet Quotation

We are the manufacturer and exporter of Truck Bearings for Volvo Truck Bearings, Mercedes Benz truck bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, and tapered roller bearing.

We are the Manufacturer of Bearings for World class Truck Bearings, which are demanded in domestic as well as in international market for their durable performance. These are manufactured from high grade stainless steel metal that remains corrosion free and abrasion resistant. These bearings can take immense load and come with proper alignment. Their axial load endurance and sturdiness make them demanding.

3434365000 / 3434301800 / 3434301200 / 3200200151

OEM NUMBER

3434365000/3434301800/3434301200/3200200151/4200200100/4200200100/1002689/1003457/100167600/100167601/

FAG NO

564734.H195 / 809302

SKF NO.

VKBA 5549

REF

CWT (COMPACT WHEEL Truck)

DIMENSION

82.00 * 196.00 *110.00

WEIGHT

14.940 Kgs. WITH BOLT

Bajaj Bearings No.

BBPL 012

CONTENT

COMPLETE ONE PC HUB WITH 12 NUTS.

Moreover, its dimensional accuracy and high thermal efficiency enhances its service life. Our array of truck bearings includes SAF Truck Bearing, Concrete Truck Bearings, HINO Trucks Bearings, Mercedes Benz Truck bearings, MAN Truck Bearing, Volvo Truck Bearings, Scania Truck Bearings, DAF Truck Bearings, SAF Truck Bearings & IVECO Truck Bearings.

Yes! I am interested




Man Truck BearingsGet Quotation

We are the manufacturer and exporter of Man Truck Bearings, IVECO Truck Bearings, DAF Truck bearings, Renault Truck Bearings, Scania Truck bearings, SAF Truck Bearings, Volvo Truck Bearings, Mercedes Benz truck bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, and tapered roller bearing.

The Man Truck Bearing, which is supremely used for giving smooth rotational functioning to the automobiles and other industrial equipment’s. These bearings are made from the best grade steel and sophisticated techniques, which ensure improvised functionality of the instruments. This bearing range is excellent for inboard and outboard positions in axle rotation. The key characteristics of our bearings are elevated load bearing capacity, rust resistant, superior finish and high tensile strength. These bearings are suitable for heavy duty trucks, rolling mills, mining equipment’s and trailers.


32017

801794AE.H195

32018

801974AE.H195

32019

803750 B (VKBA 5408)-

322206

(BT2 0130A) -

32207

(81934200320/

32208

8194200342/

32215

14013817)

32310

804162A.H130 -

33019

(VKBA 5416) (BT2 - 0135)-

33021

"(81934200346)

33022

805011C (VKBA 5409)-

33115

(7183080/7183079/2994058)

33022

81.93420.0288(VKBA5377)-

33115

(201012)(BTF 0021A)(BTF0110)

33209

81.93420.0346/81.93420.0377/

33210

81.93420.6098

(BTH - 0022)

VKBA 5408 ( 81.93420.0342/

801215M (CONRETE MIXER BRG.

81.93420.0320/81.93420.0376/

VKHB 2240 (BT1B 328251)

81.93420.6097)

VKBA 5411 ( BTF - 0074A)(201082)

VKBA 5413 ( BT2 - 0135)

BT 10097

81.93420.0354/81.93420.0344 -

Yes! I am interested




Water Pumps BearingsGet Quotation

We are the manufacturer and exporter of Water pumps Bearings, support the advancement of engines, these bearings have three times greater durability than previous bearings.

Water pump bearings come in two types. One is Ball. Ball type (BWF) and the other is a Ball Roller type (RWF). The Ball Roller type design offers a much higher radial load capability of the roller row, which is particularly important when supporting either a fan or a relatively high off-set belt load.

Newly developed water resistant seals offer five times greater durability. Bajaj has developed brand new ware resistant seals. As a result, the durability under wet conditions is increased over five times. A better grease was developed. Bajaj has developed improved grease for water pumps. It is superior in terms of resistance to water, heat and rust. Longer life is achieved by adoption of new steel material. The new steel is a low oxygen and high cleanness steel, which has a life three times longer than common bearings steel. Also, the steel is carburized to achieve a much longer life



Yes! I am interested




Truck Wheel Hub BearingsGet Quotation

We are the manufacturer and exporter of Truck wheel Hub Bearings for IVECO Truck Bearings, DAF Truck bearings, Renault Truck Bearings, Scania Truck bearings, SAF Truck Bearings, Volvo Truck Bearings, Mercedes Benz truck bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, and tapered roller bearing.

Bajaj Bearings in India are suppliers to Aftermarket Inside the wheel hubs are either roller or ball bearings that carry the vehicle's weight. On RWD vehicles with solid axles, the rear wheel bearings are mounted on the axles. The front wheel bearings on older rear-wheel drive cars and trucks usually require "repacking" (regressing) every two years or 24,000 miles. The wheel bearings on most new vehicles are sealed and do not require any maintenance. A bad wheel bearing will typically make grinding, whining or squealing noises, and you can often feel the looseness or roughness if you raise the suspension and rotate the wheel by hand. Worn wheel bearings should be replaced, because failure may cause the wheel to come off the vehicle.

Yes! I am interested




Cylindrical Roller BearingGet Quotation

We are the manufacturer and exporter of Bearings In India are suppliers to Aftermarket for Cylindrical Roller Bearings & is installed widely for their high rotating speeds and combined radial and axial loads. It is made with precision and due emphasis is given on dimensional accuracy. Further, it has high stiffness and running accuracy.

Cylindrical Roller Bearings are double low Cylindrical Bearings, which are available with integral seals and shields. Our Cylindrical Bearings are applied with grease and do not require maintenance. We see its wide application in motor, pumps and compressor industries. It has high load carrying capacity and thus allows smaller bearings that are to be used while still providing long service life.

Features:

· High performance

·Silent operation

·Least heat generation

·Less Vibration

·High temperature capability

·Integral sealing solutions

Yes! I am interested




Clutch Release BearingsGet Quotation

We are the manufacturer and exporter of Clutch Release bearings For Man Truck Bearings, IVECO Truck Bearings, DAF Truck bearings, Renault Truck Bearings, Scania Truck bearings, SAF Truck Bearings, Volvo Truck Bearings, Mercedes Benz truck bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, and tapered roller bearing.

Clutch Release Bearings We offer all kinds of clutch release bearings for trucks such as Mercedes Benz, Man, Scania, Volvo, Tata, Ashok Leyland and all kinds of trucks & trailers. We are a renowned Manufacturer and Supplier of high quality Clutch Bearings. The Clutch Bearings offered by us are precision engineered and are available at cost effective prices.


We are one of the leading manufacturer and supplier of Clutch Bearings. we obligated to meet the quality standards, as per the customer demands , Good performance, low noise, good quality and competitive price.

We provide clutch bearings assemblies in both metric and inch nominal series. These are corrosion resistant and perform even on high speed with ease. The clutch bearing is similar to a roller bearing, but instead of allowing the elements to roll freely in both directions the rolling elements lock when rolled the opposite direction. Clutches have three main tasks to perform overrunning, indexing and backstopping. The clutch consists of a series of cam shaped steel wedges.

Each clutch is placed at an angle to permit rotation in one direction, yet provides instantaneous backstopping in the other. It offers optimal running surfaces, compensates for thermal expansion, minimum energy consumption and superior speed & load carrying ability. Clutch bearings are applied to belt pulleys and chain wheels and as simple bearing support, backstop and overrunning clutch.

Yes! I am interested




Bearings & BushesGet Quotation

BAJAJ BEARINGS PRIVATE LIMITED, established in the early 1996, is one of the premier manufacturer of EngineBearings,BushesandBi¿¿¿Metallic Stripsfor the Automotive Industry. Bajaj Bearings Private Ltd is one of the few companies in the continent having fully integrated manufacturing facilities under one roof, to produce a wide range of critical auto components likebi¿¿¿metal Engine bearings,Bushes & Thrust Washersfor light & heavy automobile engines.

The company produces one of the largest ranges of automotive replacement engine bearings for engine re¿¿¿building industry and replacement market, exporting to over 70 countries worldwide.

Indicative Product Range:

Bajaj Bearings Private Limited manufactures an extensive and diverse range of bi-metal Engine Bearings, Bushes & Thrust Washers for light & heavy automobile engines.

Bearing Material

Copper Cu%

Lead Pb%

Tin Sn%

Antimony Sb%

Aluminium Al%

SAE 792

Balanced

10

10

NIL

NIL

SAE 798

Balanced

8

4

4

NIL

SAE 794

Rest

23

3.5

NIL

NIL

SAE 49

Rest

24

1

NIL

NIL

Yes! I am interested




Wheel Hub BearingsGet Quotation

We are the manufacturer and exporter of Wheel Hub Bearings for Volvo Truck Bearings, Renault Truck Bearings, SAF Truck Bearings, DAF Truck bearings, Scania Truck Bearings, IVECO Truck Bearings, Mercedes Benz truck bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, and tapered roller bearing.

Inside the wheel hubs are either roller or ball bearings that carry the vehicle's weight. On RWD vehicles with solid axles, the rear wheel bearings are mounted on the axles. The front wheel bearings on older rear-wheel drive cars and trucks usually require "repacking" (regressing) every two years or 24,000 miles. The wheel bearings on most newer vehicles are sealed and do not require any maintenance. A bad wheel bearing will typically make grinding, whining or squealing noises, and you can often feel the looseness or roughness if you raise the suspension and rotate the wheel by hand. Worn wheel bearings should be replaced, because failure may cause the wheel to come off the vehicle.

VKBA 5377 /81.93420.0288 / 42541578

OEM NUMBER

81.93420.0288 / 42541578/ 5006207845/ 81.93420.0330/ 81.93420.0349

SKF

BTF 0021 A / BTF 0110 / VKBA 5377 / VKBA 5308

FAG NO

201012 / 801974.H195 / 201044

FERSA NO.

F 300005

REF NO

TAM (Truck Axle Module)

DIMENSION

70.00 * 196.00 * 132.00

Bajaj Bearings No.

BBPL 032

Bajaj Bearings in India are suppliers to Aftermarket Inside the wheel hubs are either roller or ball bearings that carry the vehicle's weight. On RWD vehicles with solid axles, the rear wheel bearings are mounted on the axles. The front wheel bearings on older rear-wheel drive cars and trucks usually require "repacking" (regressing) every two years or 24,000 miles. The wheel bearings on most new vehicles are sealed and do not require any maintenance. A bad wheel bearing will typically make grinding, whining or squealing noises, and you can often feel the looseness or roughness if you raise the suspension and rotate the wheel by hand. Worn wheel bearings should be replaced, because failure may cause the wheel to come off the vehicle.

Yes! I am interested




Construction Machine BearingsGet Quotation
Our product range includes a wide range of 801215 concrete mixer bearing, 804182 a concrete mixer bearing, concrete mixer truck bearings f-801806 prl and 532488 a concrete truck mixer bearings.

Yes! I am interested




Spherical Roller BearingGet Quotation

We are the manufacturer and exporter of The Spherical Roller Bearings has two rows of rollers, a common sphere outer ring raceway and two inner ring raceways inclined at an angle to the bearing axis. The center point of the sphere in the outer ring raceway is at the bearing axis

Therefore; the bearings are self-aligning and insensitive to misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection. Spherical roller bearings are designed to accommodate heavy radial loads, as well as heavy axial loads in both directions.

Bajaj Bearings Spherical Roller Bearings Are available in plain & “K “Bore (TAPER BOR) series

BEARING NO.

d

D

B

22208

40.00

80.00

23.00

22209

45.00

85.00

23.00

22210

50.00

90.00

23.00

22211

55.00

100.00

25.00

22212

60.00

110.00

28.00

22213

65.00

120.00

31.00

22214

70.00

125.00

31.00

22215

75.00

130.00

31.00

Yes! I am interested




Thrust RingGet Quotation

We are the manufacturer and exporter of Thrust Wheel ring for Mercedes Benz Truck & Man Truck , We are also Manufacture and exporter of Bearings For Mercedes Benz Truck , Man Truck Bearings ,IVECO Truck Bearings, DAF Truck bearings, Renault Truck Bearings, Scania Truck bearings, SAF Truck Bearings, Volvo Truck Bearings, Mercedes Benz truck bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, and tapered roller bearing.

The Mercedes Benz Truck & Man Truck Bearing Thrust Ring, which is supremely used for giving smooth rotational functioning to the automobiles and other industrial equipment’s. These bearings are made from the best grade steel and sophisticated techniques, which ensure improvised functionality of the instruments. This bearing range is excellent for inboard and outboard positions in axle rotation. The key characteristics of our bearings are elevated load bearing capacity, rust resistant, superior finish and high tensile strength. These bearings are suitable for heavy duty trucks, rolling mills, mining equipment’s and trailers.

Models available:

Mercedes Benz Truck / MAN Truck: 346 356 1415 (115.00 * 145.00 * 32.00)

Mercedes Benz Truck / MAN Truck: 355 356 1215 (110.00 * 145.00 * 32.00)

Actros : 946 356 0015 ( 119.00 * 145.00 * 26.00 )

TechnicalDetails

Mercedes Benz Truck / MAN Truck: 346 356 1415 (115.00 * 145.00 * 32.00)

Mercedes Benz Truck / MAN Truck: 355 356 1215 (110.00 * 145.00 * 32.00)

Actros : 946 356 0015 ( 119.00 * 145.00 * 26.00 )

Yes! I am interested




JCB Bearing.Get Quotation

We are the manufacturer and exporter ofJCB Bearings, Man Truck Bearings, IVECO Truck Bearings, DAF Truck bearings, Renault Truck Bearings, Scania Truck bearings, SAF Truck Bearings, Volvo Truck Bearings, Mercedes Benz truck bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, and tapered roller bearing.

JCB Bearing, which is supremely used for giving smooth rotational functioning to the automobiles and other industrial equipment’s. These bearings are made from the best grade steel and sophisticated techniques, which ensure improvised functionality of the instruments. These bearings are ideal to be used for minimizing the friction between two moving parts in any automotive vehicles. Obtainable in varied specifications to meet numerous desires of our clients, these bearings can be customized too.

Features:

Light weight

High durability

Strong design

Technical Details:

JCB PARTS NO.

Application

907-05700

Front Axle - Outer

907-04100

Front Axle - Inner

907-50200

Planetary Gear Box

907-52200 / 907-20043

Rear Wheel Inner & Outer

907-08300

Pinion Outer&; 4WD Carrier

907-50100

Differential Bearings

907-09000

Pinion Inner

907-09600

Transmission Internal

907-51400/907-53800

Output Shaft Inner

907-52800 / 907-25800

Lay Shaft & 4WD Shaft

Yes! I am interested




Conveyor BearingsGet Quotation

We are the manufacturer and exporter of Customized Bearings for conveyor bearings. We are the largest conveyor roller manufacturer in India with the capability of producing over 20,000 conveyor rollers Bearings per month. We generate all sizes of order from ones and twos to many hundreds, no order is too small and with our manufacturing experience, full in-house product and technical knowledge we can offer high quality, cost-effective conveyor rollers Bearings that can be dispatched within schedule time.

Yes! I am interested




Commercial Vehicle BearingsGet Quotation

We are the manufacturer and exporter of Bearings In India are suppliers to Aftermarket All types Of Bearings for Volvo Truck, Scania Truck. Renault Truck , SAF truck, DAF truck , MAN truck ,Mercedes Benz Truck , Schmitz Cargobull.to the world´s leading manufacturers of commercial vehicles for axles, gearboxes and differentials either directly or through Tier One manufacturers worldwide. Bajaj Bearing is Specialists for Truck, Trailer & Bus. Differential Bearings, Gearbox, and wheel specialists

Bearing specialists for truck, trailer and bus, we offer the most extensive range for trucks, trailers, and buses, designing and manufacturing bearings for European, American, Latin American and Asian vehicles.

Truck:we provide the parts for all bearings included in the trucks from the leading brands such as Mercedes Benz, Volvo, Scania, Renault, MAN, DAF,SAF and Iveco.

Trailer:Bajaj Bearings 73% of applications for trailers from Volvo, Scania. Renault, SAF, DAF, MAN, Schmitz Cargobull.

Bajaj Bearings offers the full set of bearings needed for replacement. Bearings experts, we have advanced our knowledge in their use and can deliver specific bearing designs according to their final application.

Differential:We work with OEMs and supply to various Tier 1 in Europe, Mexico, USA, Brazil Our range of tapered and cylindrical bearings for differentials is the most extensive on the market.

Gearboxes:We are the strategic supplier for the world's leading gearbox manufacturers for aftermarket with our wide range of bearings,

Wheel:Our work with American and European OEMs allows us to design wheel bearings capable of withstanding the harshest conditions.

*Tapered Bearings: designed to withstand heavy loads.

*Truck Wheel Kits: high precision bearing sets, preset, that work well for all types of commercial vehicle applications.

*Truck Wheel Hubs: composed of 2 interior preset sets, housed in one outer hub.

*Compact Wheel Truck: inseparable assembly composed of two bearings housed in a casting. It is characterized for being perfectly aligned, lubricated for life, and preset to meet the market's highest demands.

Yes! I am interested




Truck & Trailer BearingsGet Quotation

We are the manufacturer and exporter of Truck Bearings for Volvo Truck Bearings, Mercedes Benz truck bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, and tapered roller bearing.

We are the Manufacturer of Bearings for World class Truck Bearings, which are demanded in domestic as well as in international market for their durable performance. These are manufactured from high grade stainless steel metal that remains corrosion free and abrasion resistant. These bearings can take immense load and come with proper alignment. Their axial load endurance and sturdiness make them demanding.

3434365000 / 3434301800 / 3434301200 / 3200200151

OEM NUMBER

3434365000/3434301800/3434301200/3200200151/4200200100/4200200100/1002689/1003457/100167600/100167601/

FAG NO

564734.H195 / 809302

SKF NO.

VKBA 5549

REF

CWT (COMPACT WHEEL Truck)

DIMENSION

82.00 * 196.00 *110.00

WEIGHT

14.940 Kgs. WITH BOLT

Bajaj Bearings No.

BBPL 012

CONTENT

COMPLETE ONE PC HUB WITH 12 NUTS.

Moreover, its dimensional accuracy and high thermal efficiency enhances its service life. Our array of truck bearings includes SAF Truck Bearing, Concrete Truck Bearings, HINO Trucks Bearings, Mercedes Benz Truck bearings, MAN Truck Bearing, Volvo Truck Bearings, Scania Truck Bearings, DAF Truck Bearings, SAF Truck Bearings & IVECO Truck Bearings.

Yes! I am interested




Forklift BearingsGet Quotation

We are the manufacturer and exporter of Fork Lift Bearings, which are specially designed for forklift trucks. Forklift machines make sudden and strong move with its pullers and therefore, to withstand the force. These bearings are thoroughly examined and verified. With the help of these bearings the vehicle can lift and move materials easily, which are generally used for short distance. It has added coating for corrosion resistant and capability to handle high heat. The forklift bearings play a vital role when the machines try to pick up & carry matters with its high load capacity and sturdy structure.

Channel Bearing For Forklift:

BEARING NO

INNER (d)

OUTER (D)

WIDTH (T)

MG 257282

25.00

72.00

28.00

MG 257524

25.00

75.00

24.00

MG 257624

25.00

76.00

24.00

MG 257624

25.00

76.00

25.00

MG 257627

25.00

76.00

27.00

MG 257822

25.00

78.00

22.00

MG 258022

25.00

80.00

22.00

MG 307021

30.00

70.00

21.00

MG 307822

30.00

78.00

22.00

MG 357822

35.00

78.00

22.00

MG 357823

35.00

78.00

23.00

GODREJ 3X

35.00

88.00

31.00

Yes! I am interested




Gear Box Bearings For Mercedes Benz TruckGet Quotation

We are the manufacturer and exporter of gear box bearings for mercedes benz truck bearings, volvo truck bearings, Renault truck bearing, scania truck bearings, SAF truck bearings, DAF truck bearings , IVECO truck bearing, truck wheel hub bearing, bearing set without spacer, Bearings set With Kit, bearing set with spacer, tapered roller bearing, Needle Roller Bearings.truck bearings and seals, truck bearing manufacturers, bearings truck parts, truck wheel bearings, hand truck bearings, truck ball bearings, truck axle bearings, truck parts and bearings, semi truck axle bearings, heavy truck axle bearings, truck wheel bearing adjustment, truck wheel bearing adjustment procedure, big truck bearings, truck centre bearings, truck carrier bearings, truck centre bearings , truck hub bearings cost, change truck bearings, truck bearing definition, dump truck bearings, diesel truck bearings, heavy truck bearing race driver, semi truck bearing race driver, heavy duty truck bearing packer, truck wheel bearing race driver, truck drive shaft bearing, euro truck bearing kit, engine bearing truck, hand truck bearings for sale, truck wheel bearings for sale, bearings for truck.

Specifications:

30209

32222

537/532

32219

32212

522380

528946

32220

32213

524850

528983 B

572813 A

32216

529084 D

32314 A

32221

32217

534565

32310

330632 C

Yes! I am interested




Concrete Mixer BearingGet Quotation
Leading Manufacturer of f-809280 concrete mixer bearings from Thane.

Yes! I am interested




Clutch lever BearingGet Quotation

We are the manufacturer and exporter of Clutch Lever Bearings for Scania Truck ,SAF Truck Bearings ,Renault Truck Bearing, MAN Truck Bearing, IVECO Truck bearing ,Mercedes Benz truck bearings, Scania Truck bearings, Volvo Truck Bearings, DAF Truck bearing, , truck wheel hub bearing, bearing set without spacer, bearing set with spacer, tapered roller bearing.

Clutch Lever Bearings for Scania Truck ,are suitable for dry applications at installation work zones. These bearings are developed from best grade stainless steel and most sophisticated techniques, in order to achieve high acceptability in dry work areas with high hygiene. With sturdiness and high axial load endurance, Scania truck bearings.

We are the manufacturer and exporter of Scania Truck Bearing, IVECO Truck Bearing, Mercedes Benz Truck bearing; SAF Truck Bearings, DAF truck Bearing, Volvo Truck Bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, and tapered roller bearing.

Clutch Lever Bearings for Scania Truck ,is meant for superior-speed applications in several automotive applications. These bearings are developed sturdily by making use of optimum quality cast steel & iron along with the implementation of most sophisticated techniques to make it capable of accommodating axial loads in both directions.

Clutch Lever Bearings for Scania TruckApplications for: reference

GEARBOX

FRONT AXLE

TRAILER AXLE

DIFFERENTIAL

The features of our offered bearing range are high load sustainability, dimensional accuracy, rigid structure, shock load endurance, well aligned holes arrangement, frictionless motion and noise free operation.

We are the manufacturer and exporter of Scania Truck bearings, SAF Truck Bearings, Volvo Truck Bearings, Mercedes Benz truck bearings, DAF Truck bearing, IVECO Truck bearing, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, tapered roller bearing.

The Scania Truck Bearings is suitable for dry applications at installation work zones. These bearings are developed from best grade stainless steel and most sophisticated techniques, in order to achieve high acceptability in dry work areas with high hygiene. With sturdiness and high axial load endurance, Scania truck bearings.

Yes! I am interested




Thrust Roller BearingsGet Quotation
Leading Manufacturer of thrust roller bearings from Thane.

Yes! I am interested




Bearing KitGet Quotation
Leading Manufacturer of wheel bearing kit from Thane.

Yes! I am interested




 


Contact via E-mail
Contact via SMS
Shailesh Lall (Managing Director)
Bajaj Bearings Private Limited
B- 01, Mercury, Jupiter Mercury C. H. S. L., Poonam Sagar Complex, Opposite Sector No. 9, Mira Road East
Thane - 401107, Maharashtra, India
Call Us: 
Call Response Rate: 78%
Share Us :



© Bajaj Bearings Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Bajaj Bearings Private Limited