We manufacture single row cylindrical roller bearing, which has rollers with cage that are guided on one of the bearing rings. This bearing ring with integral flanges and the other roller and cage assembly can be withdrawn from the other ring. This allows easy mounting and dismounting. These single row cylindrical bearings have high radial load carrying capacity and high speed. EC type bearings have larger load carrying capacity.


Types of Single Row Cylindrical Roller Bearing

Two integral flanges on the outer ring only Two integral flanges on the inner ring only Two integral flanges on the outer ring & one on the inner Two integral flanges on the outer ring, one integral and one loose on the inner

The double row bearings that we offer incorporate maximum number of rollers. It has low sectional height as compared to the width. This allows very high load bearing capacity, which makes them suitable for very high radial loads. These rollers are in direct contact with each other and slide against each other while rolling. They have an angular groove for lubrication. Different types of double roller bearings can be availed from us, where each type differ in the number of flanges in the outer ring.

We at Bajaj Bearings manufacture crossed cylindrical bearings. The inner & outer rings have raceways that are inclined at an angle of 45 °. It has a larger diameter when compared to its length. The crossed cylindrical bearings have a stiff bearing arrangements and are suitable for carrying very heavy loads. These bearings require minimum space and can accommodate radial,axial and moment loads. They have a normal tolerance level. Their surface finish maximizes lubricant film formation and optimize rolling motion of the rollers.


Apart from the standard single row, our range of crossed cylindrical rolls are available in the following designs:

Single or double row bearings in full compliment or caged forms Bearings with clearance and pre-load Bearings with integral gears for bolt attachments in bearing rings Bearings with integral seals

Cylindrical Roller Bearings Specifications & Standards

Dimensions - As per the ISO recommendations Allowable misalignment- Designed to adjust to limited angular misalignments. The elastic deformation in the crossed cylindrical type is very less due to large number of rollers and line of contact between them.

Although values vary, allowable misalignments have been set as follows:

Bearing width series 0 or 1 : 0.0001 rad (3.5') Bearing width series 2 : 0.0005 rad (1.5') Double row cylindrical roller bearings : 0.0005 rad (1.5')